 |
|
|
|
 |
|
|
|
mimix SAS Hardware |
|
|
|
|
|
Phy Configurations : 8, 16, 24, 32, 40 , 48
Port Configurations : 1, 2, 3 or 4 Phys per user-defined port
LUN Configurations : Up to 64 LUNs per Target (port)
Link Speed : 1.5Gbps, 3Gbps and coming soon 6Gbps
|
|
|
| mimiX Control Software |
|
|
|
|
Phy Level Control
- Assign Phys to Targets (Ports)
- Dynamically turn assigned Phys On or Off
- Dynamically set port speed (auto, 1.5Gbps or 3Gbps)
- Modify Target SAS Addresses
- Reset Phys
- Reset Targets (Ports)
Target / LUN Level Control
- Create any type of SCSI Target
- Create and/or Modify all Inquiry, Mode, Log and Diagnostic Page Data
- Create up to 64 LUNs per Target all with unique settings
- Completely customizeable capacity and block size
- Define commands (6/10/12/16 byte) to be supported at the LUN level
- Create Memory, File or Pseudo Partitions with dynamic write protect capability.
- Statistics gathering and graphical display at the target or partition level
|
|
|
| Error Injection |
|
|
|
|
|
Injection Triggers (any combination of the following)
- Command Ranges
- Time Ranges
- Specific Opcodes
- Opcode Count Ranges
- LBA Ranges
|
|
|
|
Errors
- SCSI Status
- Good
- Check Condition
- Condition Met
- Busy
- Intermediate
- Intermediate Condition Met
- Reservation Conflict
- Command Terminated
- Task Set Full
- ACA Active
|
|
|
- IO Delay
- Data Underrun
- Data Overrun
- Data Corruption
- Phy Reset
- Turn Phy On/Off
|
|
|
|
Home |
|
Contact Us |
|
Privacy Policy |
Terms of Use |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|